One of the most recognizable details of the original Hirsch Performance package for the Saab 9-5 NG may soon become available again. Dutch Saab specialist Lammertse Techniek is developing a reproduction of the distinctive stainless steel exhaust finishers, using 3D scans of original Hirsch components.
The project is currently in development, with the complete left and right set listed at €799. Final specifications, fitment, and availability remain subject to prototype testing.
For owners restoring a Saab 9-5 NG with original Hirsch styling, this could eventually solve a particularly frustrating problem: finding the unusual exhaust surrounds that helped define the rear appearance of Hirsch-equipped cars.
The Hirsch Exhaust Design Dates Back to 2011
In April 2011, Hirsch Performance introduced its stainless steel sports exhaust system for the second-generation Saab 9-5. The system was developed for the 2.0T, 2.0T BioPower, and 2.8T, with applications covering both front-wheel-drive and XWD versions, depending on the engine.

Unlike a conventional exhaust replacement focused mainly on sound, the original Hirsch installation was also an important visual element of the car’s rear design.
Its two wide stainless steel exhaust surrounds incorporated diagonal dividers that visually created four outlets. Their distinctive shape was integrated with the rear diffuser, giving the 9-5 a markedly different appearance from the standard exhaust arrangement.
A contemporary SaabBlog report published on April 6, 2011 documented the original system, including Hirsch’s efforts to achieve a refined cruising sound without excessive highway resonance.
The original cat-back exhaust replaced the factory system downstream of the catalytic converter. Hirsch also optimized the exhaust flow to reduce backpressure and improve engine response.
These details are important because the original stainless steel finishers were part of a carefully developed exhaust and styling package, rather than simply decorative universal tailpipe extensions.
Reconstructing the Original Shape Through 3D Scanning
According to Lammertse Techniek, the new components are being developed from digital 3D scans of genuine Hirsch Performance exhaust finishers.
This approach allows the company to capture the original geometry, including the asymmetric outlines, rounded edges, and characteristic diagonal divider.

Reproducing these shapes accurately is particularly important because the trim pieces need to follow the contours of the Saab 9-5 NG rear bumper and its associated diffuser.
The company intends to manufacture the reproductions in stainless steel, retaining the appearance of the original Hirsch design.
The proposed package includes:
- A complete set of left and right exhaust finishers.
- Stainless steel construction.
- The characteristic diagonal divider.
- Mounting arrangements based on the original locations.
- Installation without cutting or permanently modifying the bumper, subject to final validation.
Although the manufacturer has already presented development images, the final fitment and manufacturing specifications have not yet been confirmed. Prototype testing will determine how closely the production version matches the intended design.
Why These Particular Parts Matter
The second-generation 9-5 had a relatively short production life, and genuine Hirsch Performance accessories for the model have become increasingly difficult to locate.
Complete aerodynamic packages, exhaust systems, and individual finishing components are no longer items that owners can reliably obtain through the original accessory distribution channels.
Some original Hirsch parts do occasionally appear through specialist suppliers. However, sourcing a matching pair of exhaust surrounds, especially in suitable condition, remains a challenge.
There is also an important distinction between replacing the exhaust system and recreating its visible finishers.
The Lammertse Techniek project concerns the stainless steel exterior trim components, not the complete Hirsch sports exhaust system. Owners should therefore not expect the reproductions alone to deliver the sound or performance characteristics of the original system.
Compatibility with different rear bumper configurations and existing exhaust arrangements will also need to be established before installation.
The Original Hirsch 9-5 Performance Package
Hirsch’s work on the 9-5 NG went considerably further than the exhaust system.
The company’s original Performance Package combined engine upgrades, aerodynamic components, suspension modifications, and lightweight forged wheels.
For the Turbo6, Hirsch developed an upgrade delivering 330 hp and 430 Nm, while the Turbo4 version offered 260 hp and 400 Nm.
The full aerodynamic package included front and rear spoilers, side skirts, and the rear diffuser. The exhaust surrounds formed an integral part of this design.
In a period Hirsch Performance promotional newsletter, the company described the complete Performance configuration and explained that only ten sets had been produced for that particular package.
The exhaust was also offered within other Hirsch upgrade combinations, so the distinctive rear finishers were not exclusive to those ten complete packages.
What made the exhaust surrounds especially recognizable was the way their unusual geometry complemented the wide rear bumper and diffuser without relying on oversized circular or rectangular tailpipes.
€799 Listed Price, but Production Has Not Yet Started
Lammertse Techniek currently lists the complete reproduction set for €799 on its website.
However, the manufacturer explicitly identifies the product as still being under development. Production readiness, final fitment, finishing details, and availability will be confirmed after prototype testing.
Interested Saab owners can visit the Lammertse Techniek product page to register their interest and request further information.
The company has also shared a Facebook video documenting the project.
It is worth emphasizing that this is an independently developed reproduction, not a genuine Hirsch Performance product. Lammertse Techniek is not affiliated with Hirsch Performance.
A Potential Solution for 9-5 NG Restoration Projects
The significance of this development extends beyond owners seeking cosmetic upgrades.
Some existing Hirsch-equipped 9-5 NGs may eventually require replacement finishing components due to accident damage, corrosion, or previous repairs. Others are undergoing restorations in which finding the correct exterior accessories can be more difficult than sourcing mechanical parts.
Accurate reproductions could provide an alternative without requiring owners to sacrifice increasingly scarce original components from another vehicle.
Of course, the decisive test will come when Lammertse Techniek demonstrates a finished pair installed on a Saab 9-5 NG, with the mounting points, alignment, surface finish, and bumper compatibility confirmed.
Until then, the project remains a promising development rather than a completed aftermarket solution.
For the Saab 9-5 NG community, however, the prospect of another previously unavailable Hirsch-style component returning to the market is welcome news.











Hi I would like to know if this dual application of Hirsch exhaust is applicable to the Saab 9.3se convertible. Thanks
Mark Coleman